专注福禄克测试仪销售与技术

Since the release of the Bicsi based Modified One Connector Permanent Link, the TIA has released the Modular Plug Terminated Link (MPTL). The MPTL model is more useful as it uses a Patch Cord Adapter to test the field installed modular plug. Details are available through this KB:

自从BICSI发布了修改型一连接器永久链接以来，TIA已经发布了模块化插头终端链接（MPTL）。MPTL模型更有用，因为它使用一个接插适配器来测试现场安装的模块化插头。

Modular Plug Terminated Link (MPTL) Test Limits for DSX-5000 and DSX-8000

The following information is prior to TIA?MPTL release:

With the?DSX-5000 CableAnalyzer, it is possible to?test a link when the?far end of the cable has been?terminated with a RJ45 plug.

使用DSX-5000电缆认证分析仪，当电缆的远端用RJ45插头时，可以使用一条永久和一个通道进行测试。

Testing this to obtain a warranty from a cabling vendor? You should consult with them on their requirements, since they are issuing the warranty and not Fluke Networks. Their word is final.

这个测试是否一样可以获得布线供应商的保修服务？你应该去咨询布线供应商是否可行，因为是他们提供产品保修，而不是福禄克网络。

BICSI recognizes this style of link and certain standards bodies are looking to define this link definition.

BICSI承认这种链接模式，并且某些标准机构正在寻找定义这个链接定义。

Connect the DSX-5000 CableAnalyzer as shown?below. The main unit?must be at the patch panel end.

福禄克DSX-5000连接图如下：永久链路必须在主机端。

Selecting the test limit:

测试标准的选择：

Six option

• Tap the test limit from the?HOME SCREEN > EDIT > Test Limit > MORE
• 主页 -点击屏幕-点击编辑-测试标准-更多
• Slide down to?Application and tap to see:
• 选择应用标准ons are available. Cat 5e,?Cat 6 Cat 6A and the (+All) options which adds?ELTCTL,?TCL,?Resistance Unbalance within a pair,?Resistance Unbalance between pairs,?CMRL and?CDNEXT measurements.
• Tap?SAVE > USE SELECTED.

Unlike the DTX CableAnalyzer, this will not complain/warn about a Permanent Link adapter being mixed with a Channel Adapter. If you get a message indicating the?patch cord at the far end is bad, it means you have failed to maintain the twists in the cable entering the back of the RJ45 plug. You will need to re-terminate the RJ45 plug.