ANSI/TIA-1152
IEC 61935-1 Ed.4
The DSX provides better resolution than the minimum required for IEC 61935-1 Ed.4. It is worth investigating what resolution your vendor is using.
Frequency steps / resolution – DSX2-8000/DSX2-5000
Measurements such as Insertion Loss, NEXT and Return Loss are referred to as “swept frequency” measurements, meaning that certain points between the minimum and maximum frequency of the selected test standard are measured. It goes with out saying that if you only measure 100 points between 1 MHz and 1,000 MHz – it will make for a very quick test, but fail to provide the desired resolution.
So the field testing standards ANSI/TIA-1152 and IEC 61935-1 define the minimum frequency steps (resolution) for the test equipment vendors.
本文关键字:
原创标题：Frequency steps / resolution – DSX2-8000/DSX2-5000
原文链接：http://www.faxytech.com/archives/frequency-steps-resolution.html
版权说明：本文为深圳市连讯达电子技术开发有限公司官网（www.faxytech.com）版权所有。如果您需要转载，请注明出处并保留原文链接！如为转载文章会注明文章出处，转载文章不代表本公司观点。对于某些同行无耻恶意抄袭剽窃连讯客户案例的违法行为，连讯将追究法律责任！
详情请致电连讯公司：0755-83999818
新一代中文手持式测试仪 – 省时省力。
新一代中文手持式测试仪 – 省时省力。
新一代手持式网络分析仪 – 省时省力。
新一代快速OTDR测试仪 – 省时省力。
